Feral Gifter

Orgonite Charging Plate

How cool is this?!  This is what I want next.

Ozark Orgonite

It is made from clear resin with an Amethyst crystal in the center, along with Amazonite, Lepidolite, Abalone Shell, and 6 Herkimer Diamonds encased in Aluminum and Magnesium shavings. It is over 8 1/2 inches in diameter. I keep a glass pitcher of water charging on top of this and find the water tastes much sweeter and vibrant. Fruits and vegetables placed on top also seem to have a much better taste after an hour or so of charging.

Building a Vacuumform Table

I’ve been thinking about ways to make orgonite in different shapes.  This might help.  Dolphin TB’s!

MAKE: Blog: Building a Vacuumform table

Mozzwald writes - “Found this page about how to make a Large vacuumform table for molding. I remember seeing a small version on here before and thought this would be helpful as well. The site has plenty of other how-to’s on making molds for costumes.” - Link.

Posted by Phillip Torrone

Pouring Orgonite Towerbusters

Most people would say, just put a piece of quartz in cup cake pan, add some metal shavings and then fill with resin.  Not Donna!  Donna has gone all out to show this with 15 steps and 32 pictures!!!  A very good read.

Love For Gifting :: View topic - Making Towerbusters

When making orgonite, I like to have everything laid out and ready. Once you begin, it’s tough grabbing things with sticky resin and metal shavings on your hands. Try to find a time when your environment is peaceful and your mood is upbeat because as the orgonite cures, it has a tendency to absorb the emotions and intentions of those around it. If you have a specific purpose in mind for the orgonite, you may wish to hold the crystals and send loving thoughts of their purpose, envisioning them working to change the environment where they will be placed. I like to play classical music or something that gets me happy as they are curing as well.

Beautiful Day For TB Pouring

These crystals were for TB’s, but still hard to let go of.

I’ll post pictures of the truely beautiful crystals from Donna that will be used for personal devices soon.  The ones from Dennis’ 20/20 Deal are long gone

Poured and then cleaned the resin off of my camera!

Very nice time.

Happy Happy, Joy Joy

Time for the Happy Happy, Joy Joy Song Boys and Girls!

Or time for my happy look at what I have dance :)  A real live Gold Orgonite Pendant from TowerBusters.com and I could not be more pleased!  Dennis is a good person and a pleasure to deal with.  I had recently bought a knife from his Knives and Crystals that developed a problem and he corrected it right away.  Thanks Dennis.

Now I hope to finish up those zappers/freq gens this week.  My job which finances this has wanted me to do some work, I mean the nerve!

Unbelievable Coils

On Sensei’s WM there are pictures of unbelievable coil talent.  You must see it to believe it.
Loving attention to detail and lots of patience.   You can tell Cesco puts lots of love into his work.

Cesco’s Coils on WarriorMatrix.com

Wonderful Crystal From Donna

I just have to show off the window in this crystal.
Plus it feels so good to hold.

First picture is the crystal in front a big coffee cup.
The second picture is a detail of the window.

First Mobius Coil

My first try at a mobius coil for a SP.  When I hooked it up, there was an immediate relief from the noize.  It is not pretty, but works.  I did use the Tutor from Ryan, a wonderful crystal from Donna and a wire from a cat 5 network cable.

I didn’t have the wire he suggested and wish I had!  The wire I used was from 24 foot of cat 5E.  It has four twisted pairs.  First I had to remove all the outside insulation and then untwist the four pairs.  The next step was to untwist the single pair.  Since it was copper, it was too stiff and i had to twist it back up by hand as I don’t have a drill. 

So don’t dispair, it can be done without all the needed tools

Before I pour, do you think I should rewind it?

Pouring Orgonite Updated

I took quite hit on the last gifting run which also damaged my HP.  So, before my next run I will be making a SP. 

Since I don’t know how, I asked Donna.  Donna says, “Ryan McGinty.“  So Pouring Orgonite is updated with Ryan

Go read and learn.